Head Office:

+61 2 8543 2200

Asia:

+65 3159 1338

Projects > Decentralised Sewage > Tomago Village Tourist Park

BioGill bioreactors were installed at the pond to improve water quality.
BioGill bioreactors were retrofitted to the existing STP.
BOD reductions of up to 98% are being recorded.

Size: 30-40m³ per day

Location: Tourist park located between Newcastle and the Hunter Valley, NSW, Australia.

System Size: 2 x BioGill bioreactors. Total 492m² of membrane.

Tomago Village Tourist Park

Situation

Tomago Village Tourist Park was set to expand facilities to cater for the increasing demands from tourists and long stay residents. While the local council was supportive, there was a stipulation; the park had to upgrade its onsite treatment of wastewaters from the toilets, showers and laundry.

The existing wastewater plant treated more than 30,000 litres of wastewater each day with large morning and afternoon peaks. Given the investment in the existing plant, park management wanted to find a technology that could be retrofitted to improve treatment performance and ensure discharge compliance.

Solution

Four BioGill bioreactors were installed. Two were added to the existing conventional sewage treatment plant with a tertiary filter and a UV steriliser used on the water as it flowed to a storage pond. A further two BioGills were installed at the pond to improve water quality, control algae growth and reduce turbidity.

Design

The BioGill system was retrofitted to an existing conventional activated sludge process. Wastewater collects at a common point in a collection pit and is transferred to a buffer tank. Once the buffer tank reaches a batch volume the wastewater is transferred to the BioGill bioreactors for processing.

Wastewater is gravity fed down through the gills. Microorganisms colonise the gills feeding off the nutrients in the liquid stream. When the treatment cycle has finished, the treated effluent is pumped through a media filter, chlorinated and UV sterilised. Treated water is held in a holding tank where it is used to backwash the media filter. Excess is discharged to a pond nearby.

Results

The wastewater post treatment is recording typically less than 10mg/L of BOD and less than 100 Colony Forming Units (CFU) per 100mL of effluent, all within the discharge requirements.

Read Case Study